Product ID:TT-E-489G C-17038 BLACK GLOSS ALKYD ENAMEL
MSDS Date:05/26/1987
FSC:8010
NIIN:00F034216
MSDS Number: BTNFF

EVERSEAL MFG CO INC

475 BROAD AVE
RIDGEFIELD, NJ 07657-2329
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986

Preparer: FRANK PRIMERANO

Cage: 72988

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

7.5

RTECS: 9999999WG

RESIN

Fraction By Weight: 41%

COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 3%

OSHA PEL 3.5 MG/CUM

ACGIH TLV: 3.5 MG/CUM

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 55%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

LD50 LC50 Mixture:ORAL LD50 (LAB ANIMAL): 5 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, NAUSEA, UNCONSCIOUSNESS, IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NECESSARY. EYES:
FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point:105F
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA. WATER IS NOT A SUITABLE
EXTINGUISHING MEDIUM.
Unusual Fire/Explosion Hazard:COMBUSTIBLE

Spill Release Procedures:REMOVE IGNITION SOURCES. ENSURE ADEQUATE
VENTILATION. ABSORB SMALL SPILLS ON DRY ABSORBENT MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGE SPILLS.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT & OPEN IGNITION
SOURCES

Respiratory Protection:USE CARTRIDGE MASK IF TLVS ARE EXCEEDED
Ventilation:SUFFICIENT
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:BARRIER CREAM
Supplemental Safety and Health

Boiling Pt:B.P. Text:323-390F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.